• How to auto update all BOMs after Replace and Delete Component Entry or revision change of subassembly part

    My company has a policy where if the revision of an individual part or subassembly changes (like a cable changing from Revision B to C), the top-level assembly revision must also change (like 000 to 001). Since many top-level assemblies may use the…
  • Moving a BOM to History

    Is there a way to change an old REV of a BOM to history in order for the inactive REVs to not show on every inquiry? We have been using Sage for a long time and some of our BOMs are no longer active as we no longer build those items. We need to keep the…
  • INACTIVE ITEMS

    We have a ton of components that are set to INACTIVE, that still show up on the WHERE-USED Inquiry lookup and the WHERE-USED Report. How can we get them to not show up? We tested an item and set it to Discontinued and set it to Inactive but it still shows…
  • Sales Kit Part Pricing (BOMs)

    I am looking to utilize sales kits to add and remove parts on sales orders. However I want the sales kit pricing to be a roll up of the part prices and not have to put a price on the sale kit parent part. Individual part prices can change and I don't…
  • DISASSEMBLY

    I had an employee Disassemble something that was produced a week ago. When they disassembled the product the quantity she needed to select was off by 200lbs. How can something be produced at a quantity and not be able to be disassembled at the same quantity…
  • I don't have the work order/production module. What is the best way to incorporate labor rates into Sage 100 BOMs?

    I don't have the work order/production module. What is the best way to incorporate labor rates into Sage 100 BOMs? Right now I'm set up using misc codes.
  • Proper transaction for raw material, shipped, processed off-premise, then shipped back for assembly

    Hi everyone, Could you share your experience on how to deal with a flow of goods like below? Raw material is shipped to a vendor the vendor processes it, charges service fee, which becomes a finished goods, then they ship it back the returned…
  • Outsourced Jobs accounting in SAGE 100

    Hello SAGE ppl, We buy parts from vendor as 001 and that part for outside job and receive it as 002 - How can we account that in SAGE system? We are placing PO and receiving 001 part @ price X. Now we are placing PO and and receive the part 002 @…
  • Alternate Bill Of Materials

    Hello, our company is new to Sage 100 and in the process of setting up Sage. My question is this, is there a way to setup alternate BOM's? The closest thing I can find are BOM "options" but according to Sage this should only be used at the top level assembly…
  • Costed Bill of materials report missing components

    When running the Costed Bill of Materials Report some items will print displaying all components. Others do not. Bills are all setup as Standard. BOM Options: Maximum number of levels is 10, but these are not levels, just components listed in the lines…
  • BOM, Creating Multi Level Bills

    Is there a quick handbook for putting together multi-level bills? Thanks! Dan
  • Point of Sale Recommendations

    I'm looking for any point of sale recommendations for Sage 100. One that works and has an open API. This is for the lumber/hardware/construction retail industry with 20+ stores. Any recommendations???? Thanks!
  • Is there any down side to allowing entry of negative quantities on BOMs? Will Work Order Entry recognize the negative quantity?

    We have several BOMs with Options that require removing one item and adding another when a specific option is selected. Without this checkbox checked to allow negative quantities, we have to use Option Interactions which can get very confusing. I would…
  • How to display BOM cost during setup?

    Is it possible to display the cost of a BOM in the BOM entry screen(s)? My team members are having to complete the build & then run a report in order to see the cost of a BOM.
  • from Make to Buy - you cannot use inactive bill types - Inventory Advisor

    Hello fellow Sage users, We have one FG item that used to be Make, but in the past years we switched to Buy. We thought about putting the BOM into inactive status, but when our sales team enters a line with aforementioned item, Sage generates the error…
  • Sales order to purchase order BOM KIT's - Multilevel issue

    Hello. I hope all is well. We have multilevel BOM's defined as a KIT type in the BOM system. We wanted the ability to create a sales order for a manufactured item that consists of several levels of BOM's. The reason we went with the kit type is that…
  • Cost Roll Up and Phantom Boms, with and without "Update Intermediate Bills"

    We ran a cost roll up based on standard cost for all Bills and did not check the "update intermediate bills". This showed only a few bills that had any variance. Then we ran a cost roll up based on standard cost for all bills and checked the "update…
  • Work Ticket Item Explode Issue

    Hi, I was wondering if there is a feature that allows us to see an exploded item with in a work ticket? Essentially I have an item that has its own BOM and is a item on a work ticket. I want to be able to see the components of that item on the work ticket…
  • Engineering Changes and active work orders

    I am new to this system so please be patient with me. I have a question in regard to engineering changes that will effect active work orders. Currently when a BOM needs to be changed, the current procedure is to delete the current planed work order…
  • MAS 90 WO are my new assignment. I'm looking for a good tut to get started on this.

    I have one week of training on Sales order entry and BOM. Now my boss is pushing me to get the work orders up and running. I'd like to find a good tutorial, or some resources. Where do I start? Is there any hope for me? I've checked on youtube. There…
  • Direct Labor Costs Built into Bill of Materials for Items Sold as a Kit (always explode)

    We have a packaging company with a large variety of items which are packed to order. As we don’t prepack, virtually all our sales are through kits with the option selected to “always explode”. We do have a bill of materials (BOM) for each kit as items…
  • Phase out Inventory Item

    Items that we currently purchase are going to be "Discontinued" by the mfr. and we want to use up our inventory before we phase in the replacement part. How is this doable on MAS90?
  • BOM Option Description

    We are now setting up bills as kits in BOM, and each one of our bills has options. Ideally I would like to just show the OptionDesc for each component item code on our customized report. The problem is that the BillOptionCategory is not saved per record…
  • RE: BOM Maintenance - Copy From (Not all components are being copied)

    I am having the identical problem utilizing the "Copy From" button. Is there a program fix in the works yet?
  • BOM Maintenance - Copy From (Not all components are being copied)

    When creating a new BOM and utilizing the "Copy From" button, not all of the components are being copied. This is NOT a consistent problem, as sometimes everything copies perfectly. Anyone have any ideas as to why this is happening? We are using Sage…